| 品牌 | SKC/美国 |
|---|
SKC 热脱附吸附剂管 Sorbent Tubes for Thermal Desorption
SKC offers single and multiple-bed Thermal Desorption Tubes that meet the requirements of EPA Method TO-17 for the determination of sub-ppb VOCs in ambient air. SKC Thermal Desorption Tubes are designed for compatibility with Perkin Elmer or Markes International thermal desorbers.
SKC 热脱附吸附剂管 Sorbent Tubes for Thermal Desorption
Thermal Desorption
SKC sorbent technology research has produced superior materials for the collection of organic compounds for thermal desorption. Thermal desorption techniques offer the advantage of greatly improved analytical sensitivity. Because a solvent is not used, the collected sample is not diluted and, in most cases, analytical recovery is so close to 100% that desorption efficiency corrections are not required.
Sorbents
To be suitable for thermal desorption, sorbents must meet exacting specifications that include:
Recent developments in sorbent technology have provided some superior materials for the collection of organic compounds for thermal desorption.
Anasorb? 747 (20/40 mesh size and 980 m2/gm surface area)
This beaded active carbon has the capacity for organic vapors similar to petroleum-based and coconut-shell charcoals. It also can be used to sample nonpolar organic compounds.
Anasorb GCB1 (20/40 mesh size and 100 m2/gm surface area)
Anasorb Graphitized Carbon Black 1 (GCB1) has a moderate surface area and is equivalent to Carbopack B (60/80). This sorbent has proven to be valuable for sampling compounds of intermediate to high volatility.
Anasorb GCB2 (20/40 mesh size and 10 m2/gm surface area)
This sorbent has a low surface area and is equivalent to Carbopack C (60/80). Anasorb GCB2 is useful in collecting semi-volatile organic compounds (SVOCs).
Carbosieve S-III (60/80 mesh size and 975 m2/gm surface area)
This carbon-based molecular sieve has properties similar to the obsolete Anasorb CMS and replaces it in SKC thermal desorption tubes. Carbosieve S-III has a high capacity/breakthrough volume for small molecules and is moderay hydrophilic. It can be used for the lower boiling compounds such as halogenated hydrocarbons and alcohols.
Chromosorb? 106 (60/80 mesh size and 700 to 800 m2/gm surface area)
A porous polymer sorbent, Chromosorb 106 is used to trap low-boiling hydrocarbons, benzene, labile compounds, and volatile oxygenated compounds. This hydrophobic sorbent is the least polar polymer in the Chromosorb family and is functionally similar to Anasorb 727.
Tenax? TA (20/35 or 35/60 mesh size and 30 to 35 m2/gm surface area)
Tenax TA is a traditional sorbent (porous polymer) for trapping medium to high boiling compounds; it is especially useful for low concentrations because of its low background. Tenax TA is hydrophobic and is suitable for use in EPA Method TO-17 or IP-1B and other thermal desorption applications.
Tenax GR (20/35 mesh size and 35 m2/gm surface area)
This Tenax/graphite composite extends the range of Tenax to lower boiling compounds. It retains the ability of Tenax to be cleaned easily to a very low background and is widely used in thermal desorption applications.
Carbograph 5 TD (20/40 mesh size and 560 m2/gm surface area)
This is a medium strength sorbent for collecting hydrocarbons in the boiling point range of 50 to 150 C. It is hydrophobic and has low artifact formation.
Thermal Desorption Tube Selection for Perkin Elmer or Markes International Thermal Desorber Tubes
SKC offers single and multiple-bed thermal desorption tubes that meet the requirements of EPA TO-17 for the determination of VOCs in ambient air. All SKC thermal desorption tubes are sealed with PTFE end caps and marked with a permanent serial number. SKC thermal desorption tubes are available conditioned or unconditioned. These tubes measure 0.25-inch OD x 3.5-inch length (6.35-mm OD x 88.9-mm length) and are available in glass or stainless steel. Glass transport tubes and Swagelok? fittings are available as accessory items.
SKC 热脱附吸附剂管 Sorbent Tubes for Thermal Desorption
| Cat. No. | Description+ |
| P30121 |  | PTFE Ferrule, for Thermal Desorption Tubes PTFE Ferrule, for Thermal Desorption Tubes, pk/2 |
| 226-346 | | Sorbent Tube, Glass Thermal Desorption Tube, Anasorb GCB1/Carbosieve S-III Sorbent Tube, Glass Thermal Desorption Tube, Anasorb? GCB1/Carbosieve S-III, 1/4-inch OD x 3 1/2-inch size, 2 sections, 175/80 mg sorbent, 60/80 mesh, with open ends and WWW separators, fits Type B tube cover, ea Made for Perkin Elmer desorber Used for EPA TO-17 Each tube has a flow direction arrow and unique number. Tubes are chemically conditioned before shipping; use within 6 months or recondition, restocking fee may apply; available unconditioned |
| 226-346-UP | | Sorbent Tube, Glass Thermal Desorption Tube, Anasorb GCB1/Carbosieve S-III, Unconditioned Sorbent Tube, Glass Thermal Desorption Tube, Anasorb? GCB1/Carbosieve S-III, 1/4-inch OD x 3 1/2-inch size, 2 sections, 175/80 mg sorbent, with open ends and WWW separators, fits Type B tube cover, ea Made for Perkin Elmer desorber Used for EPA TO-17 Each tube has a flow direction arrow and unique number. Tubes are unconditioned. |
| 226-347 | | Sorbent Tube, Glass Thermal Desorption Tube, Anasorb GCB2/Anasorb GCB1/Carbosieve S-III Sorbent Tube, Glass Thermal Desorption Tube, Anasorb? GCB2/Anasorb GCB1/Carbosieve S-III, 1/4-inch OD x 3 1/2-inch size, 3 sections, 125/120/105 mg sorbent, 60/80 mesh, with open ends and WWWW separators, fits Type B tube cover, ea Made for Perkin Elmer desorber Used for EPA TO-17 Each tube has a flow direction arrow and unique number. Tubes are chemically conditioned before shipping; use within 6 months or recondition, restocking fee may apply; available unconditioned |
| 226-347-UP | | Sorbent Tube, Glass Thermal Desorption Tube, Anasorb GCB2/Anasorb GCB1/Carbosieve S-III, Unconditioned Sorbent Tube, Glass Thermal Desorption Tube, Anasorb? GCB2/Anasorb GCB1/Carbosieve S-III, 1/4-inch OD x 3 1/2-inch size, 3 sections, 125/120/105 mg sorbent, with open ends and WWWW separators, fits Type B tube cover, ea Made for Perkin Elmer desorber Used for EPA TO-17 Each tube has a flow direction arrow and unique number. Tubes are unconditioned. |
| 226-330 | | Sorbent Tube, Glass Thermal Desorption Tube, Carbosieve S-III/Anasorb GCB1/Anasorb GCB2 Sorbent Tube, Glass Thermal Desorption Tube, Carbosieve S-III/Anasorb? GCB1/Anasorb GCB2, 6-mm OD x 115-mm size, 3 sections, 250/150/100 mg sorbent, 60/80 mesh, with open ends and WWWW separators, fits Type C tube cover, ea Made for Dynatherm desorber Used for NIOSH 2549/EPA IP-1B Tubes are chemically conditioned before shipping; use within 6 months or recondition, restocking fee may apply; available unconditioned |
| 226-330-UP | | Sorbent Tube, Glass Thermal Desorption Tube, Carbosieve S-III/Anasorb GCB1/Anasorb GCB2, Unconditioned Sorbent Tube, Glass Thermal Desorption Tube, Carbosieve S-III/Anasorb? GCB1/Anasorb GCB2, unconditioned, 6-mm OD x 115-mm size, 3 sections, 250/150/100 mg sorbent, with open ends and WWWW separators, fits Type C tube cover, ea Made for Dynatherm desorber Used for NIOSH 2549/EPA IP-1B |
| 226-345 | | Sorbent Tube, Glass Thermal Desorption Tube, Tenax GR/Anasorb GCB1 Sorbent Tube, Glass Thermal Desorption Tube, Tenax? GR/Anasorb? GCB1, 1/4-inch OD x 3 1/2-inch size, 2 sections, 125/120 mg sorbent, 60/80 mesh, with open ends and WWW separators, fits Type B tube cover, ea Used for EPA TO-17 Each tube has a flow direction arrow and unique number. Tubes are chemically conditioned before shipping; use within 6 months or recondition, restocking fee may apply; available unconditioned |
| 226-345-UP | | Sorbent Tube, Glass Thermal Desorption Tube, Tenax GR/Anasorb GCB1, Unconditioned Sorbent Tube, Glass Thermal Desorption Tube, Tenax? GR/Anasorb? GCB1, 1/4-inch OD x 3 1/2-inch size, 2 sections, 125/120 mg sorbent, with open ends and WWW separators, fits Type B tube cover, ea Used for EPA TO-17 Each tube has a flow direction arrow and unique number. Tubes are unconditioned. |
| 226-339 | | Sorbent Tube, Glass Thermal Desorption Tube, Tenax TA Sorbent Tube, Glass Thermal Desorption Tube, Tenax? TA, 1/4-inch OD x 3 1/2-inch size, 1 section, 100 mg sorbent, 35/60 mesh, with open ends and WW separators, fits Type B tube cover, ea Used for EPA TO-1, IP-1B Each tube has a flow direction arrow and unique number. Tubes are chemically conditioned before shipping; use within 6 months or recondition, restocking fee may apply; available unconditioned |
| 226-360 | | Sorbent Tube, Glass Thermal Desorption Tube, Tenax TA Sorbent Tube, Glass Thermal Desorption Tube, Tenax? TA, 1/4-inch OD x 3 1/2-inch size, 1 section, 250 mg sorbent, 60/80 mesh, with open ends and WW separators, fits Type B tube cover, ea Used for ASTM D6196, MDHS 22, 23, 31, 40, and 72 Each tube has a flow direction arrow and unique number. Tubes are chemically conditioned before shipping; use within 6 months or recondition, restocking fee may apply; available unconditioned |
| 226-339-UP | | Sorbent Tube, Glass Thermal Desorption Tube, Tenax TA, Unconditioned Sorbent Tube, Glass Thermal Desorption Tube, Tenax? TA, 1/4-inch OD x 3 1/2-inch size, 1 section, 100 mg sorbent, with open ends and WW separators, unconditoned, fits Type B tube cover, ea Used for EPA TO-1, IP-1B Each tube has a flow direction arrow and unique number. |
| 226-360-UP | | Sorbent Tube, Glass Thermal Desorption Tube, Tenax TA, Unconditioned Sorbent Tube, Glass Thermal Desorption Tube, Tenax? TA, 1/4-inch OD x 3 1/2-inch size, 1 section, 250 mg sorbent, with open ends and WW separators, fits Type B tube cover, ea Used for ASTM D6196, MDHS 22, 23, 31, 40, and 72 Each tube has a flow direction arrow and unique number. Tubes are unconditioned. |
| 226-356 |  | Sorbent Tube, Stainless Steel Thermal Desorption Tube, Anasorb GCB1 Sorbent Tube, Stainless Steel Thermal Desorption Tube, Anasorb? GCB1, 1/4-inch OD x 3 1/2-inch size, 1 section, 400 mg sorbent, 60/80 mesh, with open ends and SWWS separators, fits Type B tube cover, ea Used for ASTM D6196 Each tube has a flow direction arrow and unique number. Tubes are chemically conditioned before shipping; use within 6 months or recondition, restocking fee may apply; available unconditioned |
| 226-356-UP | | Sorbent Tube, Stainless Steel Thermal Desorption Tube, Anasorb GCB1, Unconditioned Sorbent Tube, Stainless Steel Thermal Desorption Tube, Anasorb? GCB1, 1/4-inch OD x 3 1/2-inch size, 1 section, 400 mg sorbent, with open ends and SWWS separators, fits Type B tube cover, ea Used for ASTM D6196 Each tube has a flow direction arrow and unique number. Tubes are unconditioned. |
| 226-349 | | Sorbent Tube, Stainless Steel Thermal Desorption Tube, Anasorb GCB1/Carbosieve S-III Sorbent Tube, Stainless Steel Thermal Desorption Tube, Anasorb? GCB1/Carbosieve S-III, 1/4-inch OD x 3 1/2-inch size, 2 sections, 280/165 mg sorbent, 60/80 mesh, with open ends and SWS separators, fits Type B tube cover, ea Made for Perkin Elmer desorber Used for EPA TO-17 Each tube has a flow direction arrow and unique number. Tubes are chemically conditioned before shipping; use within 6 months or recondition, restocking fee may apply; available unconditioned |
| 226-349-UP | | Sorbent Tube, Stainless Steel Thermal Desorption Tube, Anasorb GCB1/Carbosieve S-III, Unconditioned Sorbent Tube, Stainless Steel Thermal Desorption Tube, Anasorb? GCB1/Carbosieve S-III, 1/4-inch OD x 3 1/2-inch size, 2 sections, 280/165 mg sorbent, with open ends and SWS separators, fits Type B tube cover, ea Made for Perkin Elmer desorber Used for EPA TO-17 Each tube has a flow direction arrow and unique number. Tubes are unconditioned |
| 226-350 | | Sorbent Tube, Stainless Steel Thermal Desorption Tube, Anasorb GCB2/GCB1/Carbosieve S-III Sorbent Tube, Stainless Steel Thermal Desorption Tube, Anasorb? GCB2/GCB1/Carbosieve S-III, 1/4-inch OD x 3 1/2-inch size, 3 sections, 210/140/165 mg sorbent, 60/80 mesh, with open ends and SWWWS separators, fits Type B tube cover, ea Made for Perkin Elmer desorber Used for EPA TO-17 Each tube has a flow direction arrow and unique number. Tubes are chemically conditioned before shipping; use within 6 months or recondition, restocking fee may apply; available unconditioned |
| 226-341 | | Sorbent Tube, Stainless Steel Thermal Desorption Tube, Carbosieve S-III Sorbent Tube, Stainless Steel Thermal Desorption Tube, Carbosieve S-III, 1/4-inch OD x 3 1/2-inch size, 1 section, 100 mg sorbent, with open ends and SWWS separators, fits Type B tube cover, ea Made for Perkin Elmer desorber Used for EPA TO-2 Each tube has a flow direction arrow and unique number. Tubes are chemically conditioned before shipping; use within 6 months or recondition, restocking fee may apply; available unconditioned |
| 226-341-UP | | Sorbent Tube, Stainless Steel Thermal Desorption Tube, Carbosieve S-III, Unconditioned Sorbent Tube, Stainless Steel Thermal Desorption Tube, Carbosieve S-III, 1/4-inch OD x 3 1/2-inch size, 1 section, 100 mg sorbent, with open ends and SWWS separators, fits Type B tube cover, ea Made for Perkin Elmer desorber Used for EPA TO-2 Each tube has a flow direction arrow and unique number. Tubes are unconditioned. |
| Cat. No. | Description+ |
| 226-358 | | Sorbent Tube, Stainless Steel Thermal Desorption Tube, Chromosorb-106 Sorbent Tube, Stainless Steel Thermal Desorption Tube, Chromosorb?-106, 1/4-inch OD x 3 1/2-inch size, 1 section, 350 mg sorbent, 60/80 mesh, with open ends and SWWS separators, fits Type B tube cover, ea Used for ASTM D6196, MDHS 72 Each tube has a flow direction arrow and unique number. Tubes are chemically conditioned before shipping; use within 6 months or recondition, restocking fee may apply; available unconditioned |
| 226-358-UP | | Sorbent Tube, Stainless Steel Thermal Desorption Tube, Chromosorb-106, Unconditioned Sorbent Tube, Stainless Steel Thermal Desorption Tube, Chromosorb?-106, 1/4-inch OD x 3 1/2-inch size, 1 section, 350 mg sorbent, with open ends and SWWS separators, fits Type B tube cover, ea Used for ASTM D6196, MDHS 72 Each tube has a flow direction arrow and unique number. Tubes are unconditioned. |
| 226-348 | | Sorbent Tube, Stainless Steel Thermal Desorption Tube, Tenax GR/Anasorb GCB1 Sorbent Tube, Stainless Steel Thermal Desorption Tube, Tenax? GR/Anasorb? GCB1, 1/4-inch OD x 3 1/2-inch size, 2 sections, 175/150 mg sorbent, 60/80 mesh, with open ends and OSWSO separators, fits Type B tube cover, ea Used for EPA TO-17 Each tube has a flow direction arrow and unique number. Tubes are chemically conditioned before shipping; use within 6 months or recondition, restocking fee may apply; available unconditioned |
| 226-348-UP | | Sorbent Tube, Stainless Steel Thermal Desorption Tube, Tenax GR/Anasorb GCB1, Unconditioned Sorbent Tube, Stainless Steel Thermal Desorption Tube, Tenax? GR/Anasorb? GCB1, 1/4-inch OD x 3 1/2-inch size, 2 sections, 175/150 mg sorbent, with open ends and OSWSO separators, fits Type B tube cover, ea Used for EPA TO-17 Each tube has a flow direction arrow and unique number. Tubes are unconditioned. |
| 226-340 | | Sorbent Tube, Stainless Steel Thermal Desorption Tube, Tenax TA Sorbent Tube, Stainless Steel Thermal Desorption Tube, Tenax? TA, 1/4-inch OD x 3 1/2-inch size, 1 section, 100 mg sorbent, 35/60 mesh, with open ends and SWWS separators, fits Type B tube cover, ea Used for EPA TO-1, IP-1B Each tube has a flow direction arrow and unique number. Tubes are chemically conditioned before shipping; use within 6 months or recondition, restocking fee may apply; available unconditioned |
| 226-357 | | Sorbent Tube, Stainless Steel Thermal Desorption Tube, Tenax TA Sorbent Tube, Stainless Steel Thermal Desorption Tube, Tenax? TA, 1/4-inch OD x 3 1/2-inch size, 1 section, 250 mg sorbent, 60/80 mesh, with open ends and SWWS separators, fits Type B tube cover, ea Used for ASTM D6196, MDHS 22, 23, 31, 40, and 72 Each tube has a flow direction arrow and unique number. Tubes are chemically conditioned before shipping; use within 6 months or recondition, restocking fee may apply; available unconditioned |
| 226-340-UP | | Sorbent Tube, Stainless Steel Thermal Desorption Tube, Tenax TA, Unconditioned Sorbent Tube, Stainless Steel Thermal Desorption Tube, Tenax? TA, 1/4-inch OD x 3 1/2-inch size, 1 section, 100 mg sorbent, 60/80 mesh, with open ends and SWWS separators, fits Type B tube cover, ea Used for EPA TO-1, IP-1B Each tube has a flow direction arrow and unique number. Tubes are unconditioned. |
| 226-357-UP | | Sorbent Tube, Stainless Steel Thermal Desorption Tube, Tenax TA, Unconditioned Sorbent Tube, Stainless Steel Thermal Desorption Tube, Tenax? TA, 1/4-inch OD x 3 1/2-inch size, 1 section, 250 mg sorbent, with open ends and SWWS separators, fits Type B tube cover, ea Used for ASTM D6196, MDHS 22, 23, 31, 40, and 72 Each tube has a flow direction arrow and unique number. Tubes are unconditioned. |
| P50291 | | Swagelok Fittings, for Use with 0.25-inch OD Thermal Desorption Tubes Swagelok Fittings, for use with 0.25-inch OD Thermal Desorption Tubes, pk/2 |
| 226-300 | | Transport Tube, Glass, for 3.5-inch Tubes Glass Transport Tube, for 3.5-inch tubes, pk/5 |
